（純討論post）各位認為RG系列適合上色嗎？

原罪

:65:
各位唔好認為小弟痴左線，
模型緊係要油啦。

因為小弟近日聽到朋友素組RG Z高達已經出事，
白化…或者斷:ice:

自己部RX-78，就上次換姿勢既時候，發現部份外殼已經裂…（我只係畫左線…:oh:）

即係點呢？
佢地既強度，連素組都會自爆…

如果仲經歷模型油溶濟既威脅…
（模魂卡碧尼爆關節，超龍神丸裂開，MG 既FA RX-78又係裂…「後面兩隻係我錯，我用太多溶濟…:56:」）

其實係我唔識上油？
定係依家D模型太脆弱？
而RG係素組都會白化既…
咁樣，點油呢請問？{:1_215:}

goahead

我只砌過一隻 RG, 我覺得 RG 真係唔錯的, 無縫處理少, 分件仔細, 減低o左 masking o既時間, 對於喜歡上色o既朋友, 其實幫助好大.

骨架太緊或者比較易爛, 我係組合時就會幫佢活動一下先, 等佢唔使咁緊~

ygat2005

模型緊係要油啦?
model kit is for assemble, spraying just its by-product.

RG既強度，連素組都會自爆
yes

其實係我唔識上油？定係依家D模型太脆弱？
50-50, your skill is not enough (more practices); the material (plastic) of some model kits are worse...



For me, i have OOB+highlighting 2 RGs, but concluded that RG just a showoff of Bandai technique. its body is made by ABS (kint of plastic, which not suitable to spray), the armor is too fit / too small / too weak (also not suitable to spray), decal still is plastic-based & too much for 1/144, ...


finally, buy/assemble model kit is a hobby. Unnecessary to care how you make it, play it, waste it. Also, don't care the speech by some kind of model master. They believe them made awsome model could gain the rights to ...

diamond001

我隻strike都係素組果時斷咗手踭位

原罪

我隻strike都係素組果時斷咗手踭位
diamond001 發表於 19-7-2013 09:27 AM

……
聽到都驚:69:

就黎可以整個苦主大聯盟…

Squall

據講ABS膠料係特別易爆, 而模魂同而家BANDAI D模型都有用ABS

ygat2005

回復 6# Squall

yes, ABS is not suitable to paint / spray.

e.g.:
http://main.kotobukiya.co.jp/fa/FATYPE001fME.html

goahead

回復 7# ygat2005

我之前都噴過 ABS 骨架, 都無脆到或者斷裂, 我覺得底灰係關鍵~

ygat2005

回復 8# goahead


我覺得thinner係關鍵

different brand has is characteristic ma;
also the proportion of thinner;
and the probability (易爆 not equal to must crack);
...

CKT

RG本身完成度好多
素組+劃線+噴消光已經好正
:35:

BoaY

我都整過三隻RG上色都冇任何不幸事發生過~

玩具人傀儡

上色靚好多{:1_214:}

原罪

我都整過三隻RG上色都冇任何不幸事發生過~
BoaY 發表於 19-7-2013 09:00 PM

可以分享下製作流程嗎？

有甚麼特別需要注意？

skyliner

RG本身完成度好多
素組+劃線+噴消光已經好正
CKT 發表於 19-7-2013 05:03 PM

我都係咁砌.  {:1_203:}

BoaY

回復 13# 原罪

其實都冇什麼特別事項要多加留意,
同一般模型上色流程差不多,
試组一次加水口位整理,洗件,上灰,上色,再組時部份位要用模型膠水作故定,
最後上光或消光油~