EX黑三一 QC問題集中貼

fatcheong

可能我個人要求較底, 個GAP我個人都可以接受, DISPLAY唔明顯, 之前買個一隻MAX GGGG 都係咁, 唔係正面都可以 ...
馬仔 發表於 3-9-2012 10:02 AM

但放耐左會唔會爆開:(

genesicgaogaiga

琴日我上左去,佢羅左三隻開果的俾我睇
三隻上色都有問題,甘佢叫我走
但我同佢講,你俾我睇多隻我就心息
跟 ...
chipanyan 發表於 3/9/2012 04:54

A large toy shop in MK  initially changed a new box for  that "gap defect" but they soon discovered that nearly all of them have more or less the same problem, so they stopped that exchange. Even the display one has got the same issue, have a look at that. I initially planned to get an exchange from Fewture, after seeing that display, I give up this plan.

馬仔

會唔會爆開好難講, 佢個位係膠, 空位唔夠夾實個件, 上鏍絲又大力, 扭扭下會斷都唔出奇.

但放耐左會唔會爆開
fatcheong 發表於 3-9-2012 10:12 AM

ToyKnife

請教一下各位大大, 小生的胸甲就是由紅三一到現在黑三一都裝得不好....:56:
一直在跌甲, 但有大大說這黑三一有改善...是否小生找不到正確的裝設方法?
試過很用力...最後還是...London Bridge...:26:

iannt2011

我的一樣，如太鬆，我包一層水喉膠布先插上

chipanyan

可能我個人要求較底, 個GAP我個人都可以接受, DISPLAY唔明顯, 之前買個一隻MAX GGGG 都係咁, 唔係正面都可以 ...
馬仔 發表於 3-9-2012 10:02 AM

問題我驚佢放耐左會爛..............................

chipanyan

阿伯度買？
iamfinethankuuu 發表於 3-9-2012 07:44 AM

    NO....佢係代理我緊係上佢到搞