SDF-1, The TD MACROSS Brotherhood

pk13061988

琴日係玩具日入左vf 100s 25g,多謝brother報料!!
外型真係好好,但係想問下係我唔好彩定係各brother
都係咁??隻25g鬆到冇人有,變fighter mode都就黎
散開.........有冇方法解決??

呂品器

原帖由 pk13061988 於 10-8-2009 11:24 AM 發表
琴日係玩具日入左vf 100s 25g,多謝brother報料!!
外型真係好好,但係想問下係我唔好彩定係各brother
都係咁??隻25g鬆到冇人有,變fighter mode都就黎
散開.........有冇方法解決??

VF100鬆呢...  就一定 :(

Fighter mode 應該係講對腳啦....  試下用寶貼萬用膠

F-14

Brothers, I have been playing with my 1/48 VF-1J in GBP-1 Armor during last weekend.:43:   
I note that the armor parts on right lower leg do not fit very well with each other, and always leaving a gap.  Moreover, probably due to the heavy weight of the upper part of the body, the knee joints of my 1J seem to be overloaded and can hardly hold the body.  They tend to bend backward occasionally.  

Do yours have similar problem?  Any advice for me to fix the problems, please?:64:

[ 本帖最後由 F-14 於 10-8-2009 12:10 PM 編輯 ]

Warmblood

原帖由 F-14 於 10-8-2009 12:02 PM 發表
Brothers, I have been playing with my 1/48 VF-1J in GBP-1 Armor during last weekend.:43:   
I note that the armor parts on right lower leg do not fit very well with each other, and always leaving a g ...

:78: 隻大甲左腳條 "gap"無得醫......死症......

企嗰方面.....硬直企時唯有上身彎前少少啦....如display空間夠...劈大雙腳...一前一後會好d:78:

F-14

原帖由 Warmblood 於 10-8-2009 12:55 PM 發表



:78: 隻大甲左腳條 "gap"無得醫......死症......

企..方面.....硬直企時唯有上身彎前少少啦....如display空間夠...劈大雙腳...一前一後會好d:78:

:64: Thanks Brother's advice.  
For the gap, I have checked the fitting many times:?  and even use a VF-1S to test it (I used to thought that it's the problem of the mould of 1J only, e.g. 1J's little wings (ventral fins)), but same result.  That said, I will try to find out the main cause if I have the time.:(

企方面, I am also thinking of ways to strengthening the knee joints if I can "open" them with the method Brother illustrated to us, cause I love this toy very much.:$ :shy:

dragonman

原帖由 呂品器 於 10-8-2009 11:34 AM 發表


VF100鬆呢...  就一定 :(

Fighter mode 應該係講對腳啦....  試下用寶貼萬用膠

我果幾部唔係好鬆咋喎 :unhappy:

呂品器

原帖由 dragonman 於 10-8-2009 01:58 PM 發表
我果幾部唔係好鬆咋喎 :unhappy:

我果幾部都幾鬆下...
但總之就pose倒啦~  除左支sniper rifle，隻手都夠力渣槍舉起~  夠啦 :(

Godzima

原帖由 呂品器 於 10-8-2009 14:27 發表


我果幾部都幾鬆下...
但總之就pose倒啦~  除左支sniper rifle，隻手都夠力渣槍舉起~  夠啦 :(

I didn't start to play with it yet !! :unhappy: :unhappy:

S20081997

原帖由 F-14 於 10-8-2009 08:41 AM 發表


Brother S, you play this trick to us again!  :angry: :DD

:! stay cool !!

S20081997

原帖由 F-14 於 10-8-2009 08:47 AM 發表

Brothers, I seldomly go to SSP.  Would you please advise when are these toy shops normally opened on weekdays ?:64:

normally 12pm is ok :78:sometimes i go at 11am also opened , sometimes need to wait :78:

F-14

原帖由 S20081997 於 10-8-2009 03:11 PM 發表
normally 12pm is ok :78:sometimes i go at 11am also opened , sometimes need to wait :78:

:64:Thanks, CHing.

[ 本帖最後由 F-14 於 10-8-2009 03:33 PM 編輯 ]

opr001

原帖由 pk13061988 於 10-8-2009 11:24 AM 發表
琴日係玩具日入左vf 100s 25g,多謝brother報料!!
外型真係好好,但係想問下係我唔好彩定係各brother
都係咁??隻25g鬆到冇人有,變fighter mode都就黎
散開.........有冇方法解決??

我都係玩具日入左vf 100s 25S, 又係鬆到PK.:53:
初初開出黎已經覺得對腳鬆,要set好耐至企到.到變fighter／gerwalk mode就更加好似溶咗咁滯...:70: 仲衰過眼鏡廠隻景品.

而加我當自己買咗隻山口算(當然山口好好多)

不過靚價都冇咁嬲

pk13061988

原帖由 opr001 於 10-8-2009 07:03 PM 發表


我都係玩具日入左vf 100s 25S, 又係鬆到PK.:53:
初初開出黎已經覺得對腳鬆,要set好耐至企到.到變fighter／gerwalk mode就更加好似溶咗咁滯...:70: 仲衰過眼鏡廠隻景品.

而加我當自己買咗隻山口 ...

係啊!本身我都諗住齊100s mf小隊,但而家都要諗過先!!
一邊變形一邊掉件整到我發火,相較之下,我覺得1/72真係好太多!!
我買左3隻,砌左兩隻,覺得除左水貼問題同機輪真係搵唔到咩好彈!!!
隻100s真係好睇唔好玩......我擺下pose都可以甩幾舊件......自動解體
可能真係我唔好彩,隻25g先咁(鬆化)........

[ 本帖最後由 pk13061988 於 10-8-2009 08:20 PM 編輯 ]

humanspider

原帖由 pk13061988 於 10-8-2009 08:18 PM 發表

係啊!本身我都諗住齊100s mf小隊,但而家都要諗過先!!
一邊變形一邊掉件整到我發火,相較之下,我覺得1/72真係好太多!!
我買左3隻,砌左兩隻,覺得除左水貼問題同機輪真係搵唔到咩好彈!!!
隻100s真係好睇唔好玩..... ...

如果模型都係1/60 就好了, 可以同 yamato 的一齊display

依家bandai 出既得 DX 合金係 1/60 :69:

好聰明既做法

humanspider

我都買左個banddai stand 黎玩下

真係work 的!:67:
不過由於鉗住既都只係一條金屬同係部機上借少少力....所以驚驚地

之前某大大話可以45度, 係得既, 不過食既力好誇, 應該冇咩macross fans 會咁做:30:

最後都係就係180度玩住先:38: