Halfeye 死士團 : final form of Dai Sword

gundamrx782

原帖由 迷人超 於 5-6-2008 10:15 AM 發表
唔知咩情況下右眼paint job脫落，"碎片"仲留左響梳化上面，各位把玩時請留神。(唉~又要動工......)

隔左o甘耐D油都未乾﹖﹗:time:
定係D油本身有問題呀……:o


話時話大家check件既時候有無跌野﹖尋日我地三個拎既時候一人跌一件﹐首先跌後腳趾﹐我o個隻跌前腳趾﹐另外一隻跌旁邊腳趾:DD

gundamrx782

原帖由 kkchoy 於 5-6-2008 10:56 AM 發表


有..... 兩隻腳d爪同"姐"腳趾紫色o個塊.....好在明叔幫我砌番落去..... :42:

我地三個人一人跌一樣既野你一個人跌晒出來:@
:DD

gundamrx782

原帖由 Monutal 於 5-6-2008 09:50 AM 發表
Hey guys! Long time no see!
A new toy just release from S.H.E. and it's time for me to show up hehehe.

After reading 迷人超 big big and Gundamrx-78 big big's review of Cybaster this morning I have ...

need to tighten all screw?! :@
I also don't understand why it can't stand on itself. Even the model with a slimmer body can do it...how come this one with a thicker body, which means heavier, can't do the same thing......:ice:
the joint of the kotobukiya model is not good at all, some of them are lossen too....

[ 本帖最後由 gundamrx782 於 5-6-2008 11:11 AM 編輯 ]

Monutal

原帖由 gundamrx782 於 5-6-2008 10:34 AM 發表

隔左o甘耐D油都未乾﹖﹗:time:
定係D油本身有問題呀……:o


話時話大家check件既時候有無跌野﹖尋日我地三個拎既時候一人跌一件﹐首先跌後腳趾﹐我o個隻跌前腳趾﹐另外一隻跌旁邊腳趾:DD

有跌野, side cover of leg and then it's the shoulder plate.

gundamrx782

原帖由 Monutal 於 5-6-2008 11:57 AM 發表


有跌野, side cover of leg and then it's the shoulder plate.

其實呢個係咪half eye玩具必經之路﹖﹖:x

Monutal

原帖由 gundamrx782 於 5-6-2008 11:10 AM 發表

need to tighten all screw?! :@
I also don't understand why it can't stand on itself. Even the model with a slimmer body can do it...how come this one with a thicker body, which means hea ...

It really has something to do with using pressure from Screw to secure it's joint.
Due to the fact that it's resin cast, there is some flexibility in the material itself. S.H.E. understand the character of this material very well and used it's flexible character, or should I say elastic character to create joint for all it's product. Using screw to tighten up the joint by giving pressure to the resin cast will not break the joint and can make it very tight. But the down side of it is the continue pressure againist the resin cast by the screw may make the resin cast to deform and the joint will be loose again.

that's why GGGG big big and some other big big on this forum suggested loosen up the screw before playing.

The weight of the back is too heavy and using screw to scure the joint a bit more is necessary. But the amount of screw that need to adjust inorder to make it stand firm is rediculously too much. Especially the joint on the waist... they should have further design that joint and make it secure in robot form. Not using a screw to secure it... the pressure from the back is indeed too heavy for the screw around the waist to sustain. And placing too much pressure may result in breaking the joint... (i am taking that risk now... having it displayed at home without a supporting stand for it's back pack.)

迷人超

原帖由 gundamrx782 於 5-6-2008 10:34 AM 發表

隔左o甘耐D油都未乾﹖﹗:time:
定係D油本身有問題呀……:o


話時話大家check件既時候有無跌野﹖尋日我地三個拎既時候一人跌一件﹐首先跌後腳趾﹐我o個隻跌前腳趾﹐另外一隻跌旁邊腳趾:DD

唔係未乾，油漆係以條狀碎片形式脫落，不過問題唔大，自己補返就得。

Monutal

原帖由 gundamrx782 於 5-6-2008 12:06 PM 發表

其實呢個係咪half eye玩具必經之路﹖﹖:x

No it is not. If this is your first S.H.E. toy then congradulation, cause it's a new setting they will start to use now in order to hide all the screw.

1 of the worse thing about S.H.E. toys is the visable screws on the face of the toy. they are no small screw in relation to the size of the toy. Some people hate it.

Rescent release of S.H.E. toy have been trying to cover up as much or screw as possible. Like D. Nova. And this Cybaster is the very best of this new setting. They use cover plate for all screw area and make the toy look much better.

BUT having said that, Visable Screw is something that I LOVE about S.H.E....

Visable Screw is like a trademark for S.H.E. toys... I still love my simple change Yuusha toys with those small screw around the toy. It's so unique and special and soooo S.H.E.-ish. Why hide them when player have to adjust them all the time...

I love the screw... please don't hide them.

[ 本帖最後由 Monutal 於 5-6-2008 12:59 PM 編輯 ]

gundamrx782

原帖由 Monutal 於 5-6-2008 12:58 PM 發表


No it is not. If this is your first S.H.E. toy then congradulation, cause it's a new setting they will start to use now in order to hide all the screw.

1 of the worse thing about S.H.E. toys is ...

ya, this is my first SHE toy~~
and the cover make me quite comfotable~~~
For a new player to SHE, I would like them to continue its work~~~

By the way, I still think I won't get any 最小變形series because they are really too small.....

迷人超

原帖由 gundamrx782 於 5-6-2008 10:34 AM 發表
話時話大家check件既時候有無跌野﹖尋日我地三個拎既時候一人跌一件﹐首先跌後腳趾﹐我o個隻跌前腳趾﹐另外一隻跌旁邊腳趾:DD

跌野好正常。:DD

Monutal

原帖由 gundamrx782 於 5-6-2008 01:11 PM 發表

ya, this is my first SHE toy~~
and the cover make me quite comfotable~~~
For a new player to SHE, I would like them to continue its work~~~

By the way, I still think I won't get any 最小變形ser ...

hahah I love them just because they are small!
In a small place like Tokyp and HK, small objects really shine like a gem :35:

迷人超

原帖由 Monutal 於 5-6-2008 01:55 PM 發表


hahah I love them just because they are small!
In a small place like Tokyp and HK, small objects really shine like a gem :35:

Monutal大大，隻Godannar到手未？

Monutal

原帖由 gundamrx782 於 5-6-2008 01:11 PM 發表

ya, this is my first SHE toy~~
and the cover make me quite comfotable~~~
For a new player to SHE, I would like them to continue its work~~~

By the way, I still think I won't get any 最小變形ser ...

I love it just because they are "small"
Hong Kong and Tokyo are small place, small object really shine like a Gem here.:35: