VOTOMS - FUNNY DEVIL (CM's)

Panzer

Originally considering buy or not to buy. Finally make up the decision as a brother said its has a concrete plastic body instead of PVC. Photos now:

Front view, although non-scale, it should be 1/24, overall QC is good, the paint has applied equally on the surface as this yellow is quite hard to do it right.

Funny Devil with its little brother.


This is the best AT downform I see in all AT products




Comments: Good QC, good colouring, flexible joints (very good shoulder joints)  and easy posing.
Weak points: no weathering at all, easily fall off shield (so I fix it using glue), no open up in the front cabin.

Thx for watching.

WalkerMachine

哈我尋晚都係睇咗車大大嘅post都決定入手
估唔到cm's出得咁實淨，我嗰隻右肩個盾都係少少易甩，我都諗住用AA胶fix死佢
可惜嘅係呢隻FATTY線條較方，我自己就較中意盒旦較圓嘅線條
Panzer大大，應該近1/35多啲喎？

[ 本文章最後由 WalkerMachine 於 25-9-2007 08:34 AM 編輯 ]

Douglas.M.Saint

Mine right shoulder was fixed by AA glue already........................... :(

Panzer, Walker, welldone!  :)

p.s. It is really 1/35.  :)

魚旦

硬係覺得壽屋盒旦o個隻做得型o的...

Panzer

原文章由 WalkerMachine 於 25-9-2007 08:32 AM 發表
哈我尋晚都係睇[quote]


[quote]原文章由 Douglas.M.Saint 於 25-9-2007 08:49 AM 發表
Mine right shoulder was fixed by AA glue already........................... :(

Panzer, Walker, welldone!  :)

p.s. It is really 1/35.  :)

Yes, it should be 1/35, my eye judgement was rather poor this morning. :die:
The CM can make better dogs than MAX if it can maintain its standard. While Takara is a bit going down this two months (lately I find that the arm joint is rather loose for the turtle).:cool:

原文章由 魚旦 於 25-9-2007 09:27 AM 發表
硬係覺得壽屋盒旦o個隻做得型o的...

Yes, they have weathering and without the need for joint movement.

[ 本文章最後由 Panzer 於 25-9-2007 09:49 AM 編輯 ]

太陽之牙

呢隻Funny Devil無聲無息咁就出左…CM's的青之騎士系列好像不會再版? 為免向隅, 所以小弟亦都立即買下(只得船仔有, $@$*). 事實裝甲騎兵中除了Scopedog外, 小弟最愛Fatty:love:

我又講下對呢隻Funny Devil的感想:

優:
1.全隻大量採用ABS膠料, 手感比PVC佳
2.比例造型OK啦…

劣:
1.又唔包pilot…:blame:
2. 右肩裝甲板未能完全嵌入ball joint, 十分易甩(小弟又唔想用膠水黐死佢:die:)
3. 駕駛倉蓋不能完全關上, 留低一大條空隙…

Panzer

原文章由 太陽之牙 於 26-9-2007 01:14 AM 發表
駕駛倉蓋不能完全關上, 留低一大條空隙….

Oh my god! I guess you should consider replacement.

The Fatty's family.

Douglas.M.Saint

Panzer, after reading your post!  I take pics with mine now! :shy:

WalkerMachine

Panzer 大..........Space Fatty X3 ！！:Q

Panzer

原文章由 WalkerMachine 於 26-9-2007 12:35 PM 發表
Panzer 大..........Space Fatty X3 ！！:Q

#x for 1 ma.:shy:

Panzer

原文章由 Douglas.M.Saint 於 26-9-2007 12:30 PM 發表
Panzer, after reading your post!  I take pics with mine now! :shy:

Looking forward!
:D

黑色三連敗

原文章由 Panzer 於 26-9-2007 10:07 AM 發表


Oh my god! I guess you should consider replacement.

The Fatty's family.

大大係肥仔fans~~~~~:DD

太陽之牙

原文章由 Panzer 於 26-9-2007 10:07 AM 發表


Oh my god! I guess you should consider replacement.

:Q我以為隻隻都係咁…!? 想請教有入Funny Devil的大大們, 倉蓋合埋時會否仍出現空隙?

AG 1/48綠Fatty跌至#)一隻, 攪到小弟都想量產…:shiny:

Panzer大大, 相信遲d 35 Max 出o既Fatty您都唔會錯過:he:

Panzer

原文章由 太陽之牙 於 27-9-2007 01:31 AM 發表

:Q我以為隻隻都係咁…!? 想請教有入Funny Devil的大大們, 倉蓋合埋時會否仍出現空隙?

AG 1/48綠Fatty跌至#)一隻, 攪到小弟都想量產…:shiny:

Panzer大大, 相信遲d 35 Max 出o既Fatty您都唔會錯過:he:

If you want to mass produce, you got to be fast as Sogx is only selling it at a temporary counter.

For Max 1/35, I will wait and see if it is also "Big Head" first.