Robot魂 ELS QAN[T] backpack issue

alfred_cht · 發表於 26-12-2012 23:16:38

I cannot plug in the backpack even i broke the wings:blame:what a stupid design:53:

any bros have the same problem ?

PS: the colours look so plastic......really wrong decision to order it this time:72:

Douglas.M.Saint · 發表於 26-12-2012 23:33:54

Can show the photos here? And, would you close up the head as well cause I wanna see it is a common QC problem or not. :64:

b855506 · 發表於 27-12-2012 00:01:22

咩話，未玩已經爛，又来抽大蛋

anowyc · 發表於 27-12-2012 00:13:22

我對好位用蠻力啪上去，得咗

genesicgaogaiga · 發表於 27-12-2012 00:25:33

Yes you are right.
The joint is too tight. I have to use cutter to trim down the ball joint a little bit before it can be attached and detached smoothly.
If forcely pushed it, wings may damage or the back pack may not be able to be pulled out again.

BTW, it is really too plastic, wrong decision too. If it is the same as tamashii llimited wing zero, it would be better.

peterseed · 發表於 27-12-2012 00:25:40

我都用左好大力先啪到入去
啪果時幾驚.....

SOHAN · 發表於 28-12-2012 01:02:34

到底要啪邊個位先入到去。。。

SOHAN · 發表於 28-12-2012 02:11:47

攪左兩粒鐘都攪唔到，想大力都唔得，搵唔到位渣住用力。。。

genesicgaogaiga · 發表於 28-12-2012 10:46:25

攪左兩粒鐘都攪唔到，想大力都唔得，搵唔到位渣住用力。。。
SOHAN 發表於 28/12/2012 02:11

trim down the ball joint a little bit

fktuen · 發表於 28-12-2012 12:27:00

Damn the plastic look!!!! :67:

fktuen · 發表於 28-12-2012 15:37:11

Damn the plastic look!!!! :67:

SOHAN · 發表於 28-12-2012 22:22:26

終於攪掂，先把個頭同埋啲觸手拆晒出黎易好多又唔驚整爛

hehemimi · 發表於 28-12-2012 22:45:27

本帖最後由 hehemimi 於 29-12-2012 09:22 AM 編輯

我用風筒吹左廿秒吹凹位再用蠻力先得..依隻算難裝...:54:

Robot魂 ELS QAN[T] backpack issue [分享討論]

相關帖子