關於SR創聖頭部白環

E6AV168

想問一下有邊個果隻白環唔會傾斜
我自己果隻向左傾斜好嚴重.....
呢次品質都集中係太陽劍同太陽之翼
頭部上色好差.....(綠寶石都無上色)

rex_tech

睇開d...算喇... 量產型係噤參差不齊... 始終佢地做模時會留位痴膠, 唔多唔少會有d歪...
bandai d 出品係噤上下嫁喇... 唔好正面睇佢, 你會舒服好多...

leawong

我諗都係要自己修正啦~

bearbearwolf

量產型係噤參差不齊..: :47:47::71::71:

睇開d...算喇... 量產型係噤參差不齊... 始終佢地做模時會留位痴膠, 唔多唔少會有d歪...
bandai d 出品係噤 ...
rex_tech 發表於 28-12-2011 11:33 AM

E6AV168

我總覺得我果隻斜得特別嚴重 =  =
笨大一開始應該好似勇者王同大鐵衛咁
送多個軟膠版本(咁E家就唔會痴死)
點睇創聖個頭都易斷過大鐵衛啦

chal

我總覺得我果隻斜得特別嚴重 =  =
笨大一開始應該好似勇者王同大鐵衛咁
送多個軟膠版本(咁E家就唔會痴 ...
E6AV168 發表於 28-12-2011 04:34 PM

大大這隻又真係幾勁 :cool:

kkkksing

痴死的嗎 為何我那隻會在不知不覺中不見了那白環:ice:
現在也不知怎辦好:no:

E6AV168

痴死的嗎 為何我那隻會在不知不覺中不見了那白環
現在也不知怎辦好
kkkksing 發表於 28-12-2011 04:38 PM

自然脫角?
用膠版界一個出來可能仲靚

Douglas.M.Saint

Mine looks no problem.  



Anyway, because of the package design, really cannot check QC for this series......... :53:

My God Raiden and "Old Iron" were bad QC one.............. :70:

kkkksing

自然脫角?
用膠版界一個出來可能仲靚
E6AV168 發表於 28/12/2011 09:30 PM

個位冇斷過的痕跡 :no:
問題是中間那個位:67:
可惜我朋友沒有買 不然就可以借來試下複模:sad:

genesicgaogaiga

It is easy to solve. I have similar problem. I used to toothpick's tip to lift the attached part of the white ring bit by bit on both sides, then its glue will be detached. You can then glue it again at will.

E6AV168

It is easy to solve. I have similar problem. I used to toothpick's tip to lift the attached part of  ...
genesicgaogaiga 發表於 28-12-2011 11:30 PM

D膠水痴得非常實喎
牙籤邊有可以撬得出....

genesicgaogaiga

D膠水痴得非常實喎
牙籤邊有可以撬得出....
E6AV168 發表於 28/12/2011 23:56

Mine can be easily detached.

Use a hair dryer to soften the part first.

Use thick toothpick with sharp end( one in japenese restaurant but not those thin toothpick )

rex_tech

竹牙纖或模型骨匡削條work best lor....

yugi

我隻勇者王隻腳條條fing到頂唔順情願痴死左佢好過:oh: