|
樓主 |
發表於 6-3-2007 16:50:23
|
顯示全部樓層
原文章由 Toyxsniper 於 6-3-2007 02:23 PM 發表
THX! 大大
但我試過, 左腳可以正常合体, 再將左邊套落右腳都冇問題! :?
再將右邊套落左腳同樣是有野頂住, 個C形固定位去唔到要去嘅位!:no:
OH,NO~~~~~~~!!!!!!
:die::die::die:
Do you mean that the defective C clip is causing the problem??
Can the C clip be folded back to 0 degree and seat on the superior border ( a resting platform for the clip) of posterior part of the lower limb??
If it can be folded to near 0 degree but failed to seat on the platform, you can try to press both clip medially with some degree of force and pull it up to the right position. But you should take care as this clip is quite delicate.
If it still fails to do so, you may try to unscrew the upper part of the lower limb to see if there is any point blocking the track of the clip.
Wish you good luck.
I have got no final fusion problem with both my initial "defective" version and later "revised" version.
[ 本文章最後由 genesicgaogaiga 於 6-3-2007 04:51 PM 編輯 ] |
|