為abs塑料平反

V3

good to see all people turn toy hobby to become gaining knowledge on material
and we are more professional to play toys :)

sac

原文章由 warxv 於 9-3-2007 11:57 發表
多謝各位回應:shy:
也不是說什麼講課上堂之類,只是看見大家對這原料有點誤解所以拿來討論一下,說真的我所知不多,這裡不少從事生產的朋友比我見多識廣應該懂得更多了.還望各路高手指教.:shy:

bighand兄:

我 ...

thanks!
do 7eleven have?
haha, building model have alot of fun!!

特級豉油

日本氣槍一直都係用ABS做外殼, BB彈都捱到:DD

GRAW

原文章由 特級豉油 於 9-3-2007 04:35 PM 發表
日本氣槍一直都係用ABS做外殼, BB彈都捱到:DD

Just the 外殼 will use ABS (due to regulation) and BB pass through the inner barrel which is made of metal.... and their sidewall are thick and have a lot of bushing inside the ABS slide or the frame to minimise breakage...

and they decided for low pressure gas like 134a only...

[ 本文章最後由 GRAW 於 9-3-2007 04:43 PM 編輯 ]

warxv

氣槍d料好似係abs+pc

MKIII

good topic! thanks :)

睡無常

多謝你o既資料:handshake:

yueyue123

呢d野真係要做塑膠行業既人先知道
另外如果直接用色種啤出黎既件都會易爆d,不過色種好處係顏色比較一致
如果用色粉+料啤的話堅韌度會高d,但係顏色相對有咁穩定!