訂左EX 真三一的朋友注意

好過去搶

一件玩具推出兩年都未出到, 會唔會係結業的先兆!:55:

馬仔

Sample 同大量生產係兩回事, Sample 可以用代替品, 貼/磨既方法去弄一個俾人地睇既樣版, 但係生產時要起模, 分件, 組裝, 全部都要計成本, 所以部件太多, 工程自然多, 人工同成本就會太高, 太高又未必有人買, 太底又無錢入袋, 所以我覺得佢又要做得好, 又想平, 係技術性問題.

其實真係好複雜咩?佢都做到個原形出來啦.....
howareuuu 發表於 9-2-2011 05:56 PM

御遠將

出唔到真係可惜......

ToyKnife

打從心底希望佢出到啦~! :64:
其實 ES series' 的 feedback 好好, 希望能為 ArtStorm 脫離財困啦.
這EX真三一的design真的帥到不行~~:35: 我都訂了差不多兩年, 只要它出得好, 出得到...再等, 再加錢都無問題~! :$
呢次真係對這玩具大愛的考驗~!!!

BlackD

七個字 "有錢洗得鬼推磨".....

base

或者將EX black getter 再版吸水 泵錢咪解決財困囉...:he:

ToyKnife

或者將EX black getter 再版吸水 泵錢咪解決財困囉...
base 發表於 10-2-2011 01:02 AM

嘩........:@
我讚成到不得了~!!!!!!:handshake:

我愛媽咪

就好似兩年前CM廠，出新版『超獸機神』合金一樣，
係玩具展度，好似係收四千幾中訂咁，但最後都話訂單小，
起唔到貨！結果退訂！可惜！可惜！

genesicgaogaiga

就好似兩年前CM廠，出新版『超獸機神』合金一樣，
係玩具展度，好似係收四千幾中訂咁，但最後都話訂單小， ...
我愛媽咪 發表於 10/2/2011 01:19

Initially they planned to release this D. Nova but CMS would only make profit if at least ~2000 pieces can be sold. So they will not produce a thing unless that amount of no. could sold.
Since the price was high for D. Nova, the initial order was canceled. Then boss of CMS planned to make them individually one after another, but this plan was also canceled for the same reason as above.
P.S. Boss of CMS really wanted to build this!


Another example, SHE GFG.
The intial prototype is as large as Getter but the overall estimated price would be high as ~100000yen. SO they stopped the plan and rebuilt a smaller simpler version for sale but it still costed ~60000 yen.

http://studio-halfeye.com/works/gfg/pregfg/gfg_top.html

herolouis800528

係d大陸廠玩野姐, 廠家最希望件product又易做又易起貨, 利錢又好, 咁EX合金嚟啲直情係豬頭骨添啦, 咪推單囉..............
如何最後大陸真係冇廠肯做, 唔該可唔可以返日本做, 多一倍價錢, 買Made In Japan, 我願意呀!!

mr0088

都是成本問題，太過複雜成本自然貴，多一部價錢唔係人人可負擔！:56:

luciferdark

根本只係佐蕂GE草圖, 無左佐蕂監修,一D意義都無,所以再版個三隻把大斧我都無入

gekigoke

打從心底希望佢出到啦~!
其實 ES series' 的 feedback 好好, 希望能為 ArtStorm 脫離財困啦.
這EX真 ...
ToyKnife 發表於 10-2-2011 12:22 AM

我只想出到貨,  我好想要law