MP562 發表於 23-7-2017 20:21:22

本帖最後由 MP562 於 23-7-2017 08:25 PM 編輯

千值盲從...呵呵呵....當所有玩家都跟你一樣盲從嗎....,爛貨你也買是你的事,其他玩家不是笨蛋,不會比較....好嗎...千值盲從...@_@lll

wordsky 發表於 23-7-2017 20:26:13

千值練成日出事:45:真係想買既等現貨再考慮最實際:45:

裂油裂到咁都無得換....離晒諳

chong8541 發表於 23-7-2017 21:02:13

好耐之前去買超獸,入面花左無都得換

leehow 發表於 23-7-2017 21:52:44

千值出品睇完當買左,因為佢既出品唔係玩具只係藝術品只可觀望不可玩,從千值拍片教你點扭關節而且片裡不停強調要扭正位既重要性, 再警告錯位關節會斷裂來睇佢已證實自家出品完全不耐玩, 試問你有見過bandai會發過同類警告影片去告誡玩家?記憶尤新斷臂機神事件可以講內,外玩家十個有九玩家都中招, 所以千值出品你仲敢買?

百鬼咁夜行 發表於 23-7-2017 23:36:37

本帖最後由 百鬼咁夜行 於 23-7-2017 11:42 PM 編輯

genesicgaogaiga 發表於 23-7-2017 11:12 AM
After manipulating the toy for a while, it gave me a feel of model or SHEinstead of chokin. Bes ...

GGGG c hing, I may be wrong, but it looks Sentinel performsbetter in its Riobot line.

For those I have, EVA, 天元 ,帝皇 are all nice (design, QC, printing)

METAMOR-FORCE is an expanding line, focusing on transformation and combination. I have 太空魔龍 and Dancougo from this line, but none of them gives me same satisfaction level as Riobot line products did (esp Dancougo, I went for exchanges twice).

I am looking forward to seeing Sentinel's 真三一 (judging from the success of 帝皇), but for product from METAMOR-FORCE line, I still have reservation.

c.ryo 發表於 23-7-2017 23:44:12

其實三月開訂時老千官方blog已經post曬合體要拆劍龍肩,劍龍用拳頭就可以唔拆手黎合體,當時亦已經全開比你睇內構係點,成品發售前比消費者嘅透明度完全唔差,不過老千就是硬是比較容易會有點qc質料問題咁... 雖然強如笨大都避唔到次貨出街:38:

追風 發表於 24-7-2017 01:10:22

其實產品常有問題出現的話,至少服務要做到好才是吧?{:1_212:}

mj23 發表於 24-7-2017 03:17:45

genesicgaogaiga 發表於 23-7-2017 06:13 PM
comparing withevolution is not fair. Evolution QC and non sense design are both ridiculous.
QC is...

佢地隻高狄安嚇Q死人, 真係當人傻

genesicgaogaiga 發表於 24-7-2017 07:39:10

百鬼咁夜行 發表於 23-7-2017 11:36 PM
GGGG c hing, I may be wrong, but it looks Sentinel performsbetter in its Riobot line.

For those ...

U are right, riobot is still ok but QC is not perfect now. My mazinger had a tilted trunk

genesicgaogaiga 發表於 24-7-2017 07:40:34

mj23 發表於 24-7-2017 03:17 AM
佢地隻高狄安嚇Q死人, 真係當人傻

Low cost but high profit, even worse than CMS time

mj23 發表於 29-7-2017 02:38:11

genesicgaogaiga 發表於 24-7-2017 07:40 AM
Low cost but high profit, even worse than CMS time
唯有寄望bandai, 佢本合金魂20週年, 圖就有, 但影都未見, 唔知最後會唔會又胎死腹中.
但睇佢啲設計圖, 又唔想佢出到好似天威咁樣

kinis 發表於 1-8-2017 17:35:00

姑仔通知可取貨了, 果真係等到動漫後派街

c.ryo 發表於 1-8-2017 22:08:39

攞咗慢派貨,touch wood 冇乜問題
隻倍功夫大肶同腳板底係合金,以空心野黎講都有小小重量
跟住就係等睇大貨玩家們有乜回應... 不過其實日本同動漫展都巳經賣咗幾日…

Hawk 發表於 1-8-2017 22:30:53

師兄啲紅油有冇之前所講既花哂? 如果冇乜大問題我聽晚都去拎貨喇! Thx~

HakiRyu 發表於 1-8-2017 23:05:25

本帖最後由 HakiRyu 於 1-8-2017 11:52 PM 編輯

Got mine today. No paint problem and QC is alright. Don't need to take out the arms to combine. Sculpture and mobility is much better than GX-39/R, but very light weight due to lack of die-cast. If anybody here is hoping to get a Soul of Chogkin or a heavyweight, you will be disppointed. But if you are looking for mobility and a almost Baikanfu feel, Sentinel did it well. Sentinel definitely overpriced it. Saying all that, I think this Baikanfu is great. Nothing is perfect, even the GX-39R isn't. No regret choosing this over the GX-39R.

http://i.imgur.com/b8a2EZI.jpg
頁: 15 16 17 18 19 20 21 22 23 24 [25] 26 27
查看完整版本: 千值練 天威勇士 無敵鐵甲人 (#203 updated video 介紹)