【勇者@toysdaily: Yusha net updated in Japan 4/9/09

genesicgaogaiga

原帖由 殺生丸 於 6-1-2008 00:06 發表
另外都想問下，仲有無地方可以買呢隻GGGG???

淨係見到船仔有，但!$*X好似貴左dd........
:79:

後悔早排無買！！！

Red label is more or less around that price.

genesicgaogaiga

原帖由 提子汁 於 6-1-2008 14:45 發表
我想問果個黃金勇者...大合體果隻買左幾多港幣？？？

Sorry, I did not buy that re issued 黃金勇者, so I can't answer your question.
The price should be  around  $1000.

a_c_e06

GGGG大大,請問邊度仲可以搵到CMS Brave 01,01x呀??:64:

chipanyan

原帖由 genesicgaogaiga 於 4-1-2008 07:29 PM 發表


Sorry, I can't ask a shop to build it for you.

The material needed:

1.Bandai Action base: transparent.
2.Stand of medicom RAH 301 body.
3.small screws x 2
4. cushion sticker: can be bough ...

我有一個不情之請，請問可唔可以幫我整一個勇者王ｄ台？我肯付出手工費
因為我睇唔明你ｄ英文．．另外Bandai Action base這個我係街搵唔到．．
我好心胃痛隻勇者王無果座俾佢呀．．好危險∼＞＜:55:

genesicgaogaiga

原帖由 chipanyan 於 7-1-2008 00:46 發表

我有一個不情之請，請問可唔可以幫我整一個勇者王ｄ台？我肯付出手工費
因為我睇唔明你ｄ英文．．另外Bandai Action base這個我係街搵唔到．．
我好心胃痛隻勇者王無果座俾佢呀．．好危險∼＞＜:55:

If I do this for you, other may ask me to do the same thing in future. So I can't help you.
Concerning the Bandai Action base, it can be  easily found in model shops e.g. Universal model shop and even departmental store.

Monutal

Go to jusco you can find some Gundam Action base ga la

chipanyan

原帖由 genesicgaogaiga 於 7-1-2008 01:59 PM 發表


If I do this for you, other may ask me to do the same thing in future. So I can't help you.
Concerning the Bandai Action base, it can be  easily found in model shops e.g. Universal model shop and ...

我想問一下這些是什麼來？
Stand of medicom RAH 301 body.
3.small screws x 2
4. cushion sticker: can be bough
謝謝．．．我試下自己做．．

Monutal

原帖由 chipanyan 於 7-1-2008 10:43 PM 發表

我想問一下這些是什麼來？
Stand of medicom RAH 301 body.
3.small screws x 2
4. cushion sticker: can be bough
謝謝．．．我試下自己做．．

Stand of medicom RAH 301 body -  is a 12" figure standard body, not hard to find, go to ship ship and ask the for a medicom pure body. Included in the body is a stand for 12" figure display, that's the stand that GGGG big big was talking about.

small screws - is small 螺絲

cushion sticker - is 軟墊貼紙(有厚軟墊的貼紙), can find it in any supermarket

genesicgaogaiga

原帖由 Monutal 於 9-1-2008 11:58 發表


Stand of medicom RAH 301 body -  is a 12" figure standard body, not hard to find, go to ship ship and ask the for a medicom pure body. Included in the body is a stand for 12" figure display, that' ...

There is Hong Kong made FAKE 12" RAH stand in toy shops e.g. Wanchai "Tai Yuen Street"

chipanyan

原帖由 Monutal 於 9-1-2008 11:58 AM 發表


Stand of medicom RAH 301 body -  is a 12" figure standard body, not hard to find, go to ship ship and ask the for a medicom pure body. Included in the body is a stand for 12" figure display, that' ...

感謝！！！以後如果有什麼要我幫手，開聲就得啦！！

chipanyan

原帖由 genesicgaogaiga 於 9-1-2008 02:18 PM 發表


There is Hong Kong made FAKE 12" RAH stand in toy shops e.g. Wanchai "Tai Yuen Street"

我想問．．用貼紙固定ｇｇｇｇ　ｐａｔｐａｔ　唔怕佢痴埋ｄ油咩？

genesicgaogaiga

The most famous one:
Kaiyodo's 山口勝久
山口勝久 is actually most famous for his 勇者王首辦.
The initial series was fixed
( Robot museum)
This was his first GGG in 1997
Dividing driver


2nd one
Goldion Hammer
missing pic


3rd one
Star Gaogaigar



The other GGG mech.










After years of building fixed GGG, 山口勝久 started the prototype of Revoltech.
山口式 勇者王 首辦


first 山口式 GGG 首辦: Gaogaigar
The specially cut joints allowed the resin cast to move and pose.
This was the first of the kind: good shape and movable cast: never seen in the past
=>>quite stunning at that time.

There was no weapon at all but dividing drivers and Steath II were added into the HKG FAKE version: these parts actually came from the dividing driver of kotobukiya's GGG and Steath II of fixed kaiyodo star GGG

The joints were strong enough to allow the GGG to hold a Hobby Japan without falling from it head.
A little no. of boxes  were sold in Wonder Festival. After ~6 months, ordinary version came out. The price was a little bit higher.



This was second one: Gaofighgar
The joints were improved and the range of movement increased.
Still no weapon again.



Though a Goldion Hammer was found on Hobby Japan, it was never built.

The final one was GGGG
The joints were so strong that it can hold a "yellow page".
Still no weapon
HKG has built a dividing driver for it but the quality was so poor.
Only ~20 boxes were first sold in Wonder Festival.
Luckily I asked a model shop to get this for me in Japan.

~6 months later, the ordinary version came out, but it was much expensive than the initial press version.
This is the box art of ordinary version.






Kotobukiya's movable series
Small sized movable GGG ~HG size like





4 dragons pics were missing

The other smaller sized movable GGG Mech






Then MG size like came out
The first large sized GGG + goldion hammer and star GGG:  movable but the joints were very loose.


The second and third  were GFG and GGGG.

=>>can perform Final Fusion with interchanging parts.


Many people used the weapons of Kotobukiya's GGGG for Kaiyodo's GGGG



Will knife of Kotobukiya on Kaiyodo


アトリエ彩
FIXED series





Star GGG: missing pic














King Jder missing pic


The SAI  moving   GGG



OTHERS
GGG by the author of FEWTURE EX GETTER 佐藤 [ ロボ師 ] 拓


WF 2005: author unknown


Wonder Kid
GFG and GGGG



[ 本帖最後由 genesicgaogaiga 於 13-1-2008 10:23 PM 編輯 ]

ivanlam0210

原帖由 genesicgaogaiga 於 10-1-2008 12:26 AM 發表
The most famous one:
Kaiyodo's 山口勝久
山口勝久 is actually most famous for his 勇者王首辦.
The initial series was fixed
( Robot museum)
This was his first GGG in 1997
Dividing driver
http:// ...

GGGG 大大 Where can i buy more 勇者之系列 item in Japan ? I will to go to there coming in this week. Pls let me know if possible. Thanks:77: :77:

genesicgaogaiga

原帖由 ivanlam0210 於 13-1-2008 02:39 發表

GGGG 大大 Where can i buy more 勇者之系列 item in Japan ? I will to go to there coming in this week. Pls let me know if possible. Thanks:77: :77:

What kind??
toys, resin cast, PVC toys, DVD version PVC toys???

ivanlam0210

原帖由 genesicgaogaiga 於 13-1-2008 12:56 PM 發表


What kind??
toys, resin cast, PVC toys, DVD version PVC toys???

Everything about 勇者之系列 ?