Halfeye 死士團 : final form of Dai Sword

genesicgaogaiga

原帖由 gundamrx782 於 13-9-2008 21:54 發表

then maybe I should try to find it when I go to Japan next time....:unhappy:

No sign of Gravion & D. Nova in Japan in August.

genesicgaogaiga

原帖由 kampferms18 於 13-9-2008 21:44 發表
Today, just notice that there are 4 SHE items available for sale at B1/F of CWB sugar street (Gxxx-toys). The 1st three are claimed to be "brand new". The 4th one is 2nd-handed.

1) Gunbuster
2) Gr ...

I will not believe in that shop for so called brand new SHE.
That shop only sells 2nd handed toys.
SO called 2nd handed may be poor condition 2nd handed or even 3rd handed.

kampferms18

原帖由 genesicgaogaiga 於 13-9-2008 11:24 PM 發表



I will not believe in that shop for so called brand new SHE.
That shop only sells 2nd handed toys.
SO called 2nd handed may be poor condition 2nd handed or even 3rd handed.

Yes, 團長, I share the same view with you. That's why my wording is "claimed to be brand new". :p

kampferms18

原帖由 genesicgaogaiga 於 13-9-2008 11:23 PM 發表


No sign of Gravion & D. Nova in Japan in August.

Ar.... Just recall that I had seen one god gravion and one god sigma gravion (brand new, normal version) in Akiba in August.

goodies

GXXX-TOYS個隻GODANNAR﹐我今日都好奇走去睇過。個頭頂藍色個塊甲斷過﹐見到係用AA膠"痴"返。。。。其他部份都幾新淨。不過唔係全新都要成6K﹐又確係食水深D~~~~~

我的神魂合體~~


陰陽電磁俠???


有小小高低膊






露左小小籃色底底添~~~


[ 本帖最後由 goodies 於 14-9-2008 02:04 PM 編輯 ]

genesicgaogaiga

有小小高低膊

It is a mold defect of the Godannar.
If you look carefully, you will find that the interconnecting parts between the should and the chest on both sides are slightly different in shape. The inner part of one side is thicker than the other, so one side will drop down.

For mine the right sided part is thicker than left one.
So I used a knife to reshape the inner side of R sided part  in order to match that on the left.
The shoulders are equal now.

kampferms18

原帖由 goodies 於 14-9-2008 01:19 AM 發表
GXXX-TOYS個隻GODANNAR﹐我今日都好奇走去睇過。個頭頂藍色個塊甲斷過﹐見到係用AA膠"痴"返。。。。其他部份都幾新淨。不過唔係全新都要成6K﹐又確係食水深D~~~~~

我的神魂合體~~

Oh! 可動火.....:handshake:

[ 本帖最後由 kampferms18 於 14-9-2008 05:14 PM 編輯 ]

genesicgaogaiga

原帖由 genesicgaogaiga 於 14-9-2008 16:45 發表


It is a mold defect of the Godannar.
If you look carefully, you will find that the interconnecting parts between the should and the chest on both sides are slightly different in shape. The inner  ...

That's the result. Look, the right shoulder is better now.





[ 本帖最後由 genesicgaogaiga 於 15-9-2008 01:54 PM 編輯 ]

genesicgaogaiga

原帖由 kampferms18 於 13-9-2008 23:37 發表


Ar.... Just recall that I had seen one god gravion and one god sigma gravion (brand new, normal version) in Akiba in August.

kampferms18 , you finally opened up your god gravion for photo taking.:43:


This's my gravion.
No mold defect can be found, so there is no need for reconstruction.
But the weight of the upper part is really great, so I need to readjust the screws intermittently in order to keep it straight. Recently, I also added a support to the buttock to reduce the stress on the hips too.

garykctse

各位大大: 小弟發覺隻小變大腿關節果對 ball joint 好鬆(黃圈圈住), 好多時都企唔
穩, 請問各位有乜野建議?

迷人超

原帖由 garykctse 於 15-9-2008 06:01 PM 發表
各位大大: 小弟發覺隻小變大腿關節果對 ball joint 好鬆(黃圈圈住), 好多時都企唔
穩, 請問各位有乜野建議?

細個讀書時我會用以下呢隻UHU膠水，一般書局或五金鋪有售，黎應用於當年尚未開發軟膠關節圈既高達模型關節上，德哥都係用呢種方法架。
視乎關節大小，滴些少出黎，用食指同姆指搓，好似你平時搓鼻屎咁:p，搓到細細粒灰色咁，然後放入鬆左既關節度，好使好用，又唔會黐死個關節。:78:
唔知有冇大大有其他更好既方法呢？


[ 本帖最後由 迷人超 於 15-9-2008 10:59 PM 編輯 ]

gundamrx782

原帖由 迷人超 於 15-9-2008 10:53 PM 發表

細個讀書時我會用以下呢隻UHU膠水，一般書局或五金鋪有售，黎應用於當年尚未開發軟膠關節圈既高達模型關節上，德哥都係用呢種方法架。
視乎關節大小，滴些少出黎，用食指同姆指搓，好似你平時搓鼻屎咁:p，搓到細細 ...

我之前都係用blue tick解決架~~~:x

迷人超

原帖由 gundamrx782 於 15-9-2008 11:04 PM 發表

我之前都係用blue tick解決架~~~:x

寶貼萬用膠應該都得，我未試過，會唔會黐得太實呢？:?

genesicgaogaiga

My ways of dealing SHE loosened joint are: re screwing + detachment + thickening + roughening

1.Tightly re screwing  of buttock cover if any
2.Detach the whole joint by unscrewing off the buttock cover. Then the hips should be exposed.
3. Application of small drop of AA to the surface in order to thicken and roughen the surface of the ball joint.
               or
    Use a knife to make small cuts on the surface in order to increase the friction between the ball and socket.

UKU is a good choice but the drop would be too large for small joint. Besides it will dissolve the resin and you will not be able to rescue it if any problem arises. Furthermore, excessive AA can be scratched off easier than UHU without any risk of dissolving the joint and it dries up quicker, so it is the best choice.

P.S. MAX also recommended usage of AA glue for loosened joints in MAX factory toys.

迷人超

原帖由 genesicgaogaiga 於 16-9-2008 11:56 AM 發表
My ways of dealing SHE loosened joint are: re screwing + detachment + thickening + roughening

1.Tightly re screwing  of buttock cover if any
2.Detach the whole joint by unscrewing off the buttock  ...

用AA膠加厚關節表面，真係一個好方法喎！:shiny: