想問下各大大，依家係旺角仲有無機會買到呢隻勇者聖戰呀
原文章由 黑馬騮 於 8-8-2007 06:02 PM 發表
想問下各大大，依家係旺角仲有無機會買到呢隻勇者聖戰呀
有 ... 不過冇一間 shop 寫價 $ :shy:
原文章由 yugi 於 8-8-2007 05:57 PM 發表
今天見焦人同一樓果間都有一盒係店內,看來某些店分到多過一盒,但可惜都係得個望字
Not only one box for each shop if you are ordering from Elite.
But SupermXX is ordering from 宮沢模型 of Japan. So the price would be higher.
原文章由 黑馬騮 於 8-8-2007 06:02 PM 發表
想問下各大大，依家係旺角仲有無機會買到呢隻勇者聖戰呀
Toy or game???
If you are talking about DX GBG, there should be still some stock in Mong Kok.
But the price may not be as low as that in Tai Po and Fanling.
[ 本文章最後由 genesicgaogaiga 於 8-8-2007 06:07 PM 編輯 ]
原文章由 genesicgaogaiga 於 8-8-2007 06:05 PM 發表
Toy or game???
Mong Kok, there should be still some stock.
But the price may not be as low as that in Tai Po and Fanling.
係想買新個隻cm's合金呀，旺角似乎都幾貴喎:cool:，tai po我都未去過，唔係咁熟，是否離旺角很遠架﹖
原文章由 黑馬騮 於 8-8-2007 06:10 PM 發表
係想買新個隻cm's合金呀，旺角似乎都幾貴喎:cool:，tai po我都未去過，唔係咁熟，是否離旺角很遠架﹖
The lowest price in Mong Kok is ~28XX.
The price in Tai Po Center is ~28XX too.
The price in Fanling Center is ~27XX!!
Are you living in Mainland China??
You can reach Tai Po and Fanling by KCR.
For Tai Po center, you may need to take bus, minibus or taxi.
For Fanling Center, you can get there by walking once you take off from KCR station.
原文章由 genesicgaogaiga 於 8-8-2007 06:17 PM 發表
The lowest price in Mong Kok is ~28XX.
The price in Tai Po Center is ~28XX too.
The price in Fanling Center is ~27XX!!
Are you living in Mainland China??
You can reach Tai Po and Fanl ...
fanling果間是否only得一盒,過幾天想去睇下:no:
原文章由 yugi 於 8-8-2007 06:31 PM 發表
fanling果間是否only得一盒,過幾天想去睇下:no:
I am not sure now.
原文章由 genesicgaogaiga 於 8-8-2007 06:32 PM 發表
I am not sure now.
那明天出去看先,希望唔會比人買左
原文章由 yugi 於 8-8-2007 06:38 PM 發表
那明天出去看先,希望唔會比人買左
I wish that you can get one.
Be sure to check the kit before you pay,
The QC may not be so good.
I selected one out of 3 in SupermXX and 1 out of 2 in Tai Po.
SupermXX: Japan direct version: no lacking nor defective parts. The golden paint of theSperion's small wings was melted by thinner. I needed to get an exchange. The paint over the joints of arms was damaged at the corner area.
Tai Po: Electroplating was not so good. It was not as shine as those from SupermXX. The wheels of the Baan Gaan's right arm were totally dislodged and small parts were missing. The second box showed some small blue paint on the golden plated left ear of Baan Gaan. Besides the painting of the Baan Gaan's right leg was not perfect. But the shop owner told me: "PLEASEBEHAVE YOUSELF. TOYS ARE FOR PLAYING ONLY,I have been playing toys for 20+ yrs and I would not do the same thing as you." I did not argue with him and I just took that box. ( though it is not as perfect as the SuperMXX ones, but it is still acceptable).
:blame::blame:
I will not buy any expensive toy from that shop in the future.
SupermXX is more expensive, but I can always get an exchange even when I have taken the toy back to my home.
[ 本文章最後由 genesicgaogaiga 於 8-8-2007 06:55 PM 編輯 ]
原文章由 genesicgaogaiga 於 8-8-2007 06:17 PM 發表
The lowest price in Mong Kok is ~28XX.
The price in Tai Po Center is ~28XX too.
The price in Fanling Center is ~27XX!!
Are you living in Mainland China??
You can reach Tai Po and Fanl ...
真係唔該你解答左我咁多問題，我係澳門的，但要塔kcr對於我即日來回來講大麻煩啦，又唔熟路，睇黎我都係去旺角碰下運氣睇下有無平既算
原文章由 genesicgaogaiga 於 8-8-2007 06:53 PM 發表
I wish that you can get one.
Be sure to check the kit before you pay,
The QC may not be so good.
I selected one out of 3 in SupermXX and 1 out of 2 in Tai Po.
SupermXX: Japan direct ...
原來限定版d qc都多問題,不過我一向選玩具只要不是太離譜我都算,只係今次成三千銀有d驚買了盒有問題的,最驚會缺件:no:
差點忘記遲幾天有toy show,可能要過埋toy show睇下有無新brave合金先決定到買:no:
[ 本文章最後由 yugi 於 8-8-2007 07:16 PM 編輯 ]
原文章由 yugi 於 8-8-2007 07:05 PM 發表
原來限定版d qc都多問題,不過我一向選玩具只要不是太離譜我都算,只係今次成三千銀有d驚買了盒有問題的,最驚會缺件:no:
So you MUST OPEN it up and check parts.
Since the majority of them are from ELITE. i.e. "water stock". You will not be able to claim from CMS.At least
you should watch carefully for missing parts and asymmetry. I hoped that you can get a near perfect one!
:!
One point, you should try to move the joints of the small Sperion. Some of the ball joints may be fixed by glue and paint, you may then break it once you turn the joint. Beware of it.
http://farm2.static.flickr.com/1291/938428978_3e67d83ca3_o.jpg
原文章由 genesicgaogaiga 於 8-8-2007 07:19 PM 發表
So you MUST OPEN it up and check parts.
Since the majority of them are from ELITE. i.e. "water stock". You will not be able to claim from CMS.At least
you should watch careful ...
那到時一定要check真d大大所說的地方了,不過可能要延到下星期左右先去,因為要睇埋個toy show黎緊會有咩新野先得
原文章由 yugi 於 8-8-2007 07:28 PM 發表
那到時一定要check真d大大所說的地方了,不過可能要延到下星期左右先去,因為要睇埋個toy show黎緊會有咩新野先得
Do you mean WF 2007 summer?
I will attend it on this Sunday andI will post some pics esp. Yusha as soon as possible.