hathaway 發表於 7-10-2009 14:45:20

超合金魂 Mazinger Z GX-45及GX-49小評

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010517728.jpg

笨大最新揾笨大法! 一模小改, 加件再開!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010302314.jpg

先講GX-49, 本體同GX-45差不多一模一樣, 除左個身! 亦因為個身既可變系統, 導至可動性大大減低! 最慘係GX-1都好玩過佢.....

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010250921.jpg

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010318397.jpg

買GX-49最主要為左對翼! 其餘配件(座及手等)完全同GX-45一樣!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010221796.jpg

可動性, 接近零!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010235765.jpg

原本諗往入模型版, 不過太大隻! 呢隻接近1/144, 啱我多D!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010208870.jpg

如果擺人型display, 好無point!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010155594.jpg

全隻最失敗既設計在於上半身! 先打開心口, 拉出雙手, 再放個死人頭入去! 就咁睇無乜問題, 可惜, 笨大就用左呢個借口取消GX-45既腰及股關節! 搞到我要入多隻....

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010141630.jpg

其餘變型極簡單! 只需"打包"下半身就OK!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010111750.jpg

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010058132.jpg

好彩, 隻神の拳都幾有氣勢!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010123981.jpg

手指可動性接受種度內! 我係Beyond fans, 一定要做番D野! 哈哈!
Remarks: 市面太多細路/低能仔, 見到可動手指就淨係識得擺最長果隻出嚟, 好難頂! 我地中國係禮儀之鄉, 請各位明白! 唔好同d無文化既"動L"人一樣, 做埋哂D令人誤會中國=無文化既行為!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010331766.jpg

GX-45係完全為佢既可動而入! 對上一隻魂萬能俠以經係GX-1....十幾年前!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010345356.jpg

當年GX-1我好滿意, 似番隻合金, 可惜, 而家只算合"膠"! 仲要貴左.....

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010400118.jpg

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010415849.jpg

拉出式關節, 小弟最早於Max隻帝皇領教過! 非新技術!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010427637.jpg

十幾年了, 笨大既模型技術以經遠遠拋離其他廠商, 可惜, 合金技術只可拋離CM呢間不思進取.....Max Factory真係做得好過笨大! yamato如果合金比例高多一點亦能勝過笨大!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010439188.jpg

GX-1隻翼可變, 嚟到GX-45竟然要拆件, 笨大去死啦!

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010451151.jpg

http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010503747.jpg

GX-49隻神の拳可安上GX-45, 完全perfect! 唔怕甩!
Remarks: 笨大快d出金毛獅王同宇宙大帝啦! 出嚟出去ver2, 好悶呀!

taken 發表於 7-10-2009 14:58:48

笨大:38:

老文 發表於 7-10-2009 15:05:52

好貼!..要回:71:...至於合金..我都係支持笨大的..

[ 本帖最後由 老文 於 7-10-2009 03:08 PM 編輯 ]

redfish 發表於 7-10-2009 15:09:01

兩隻共用件其實唔算好多

tit129 發表於 7-10-2009 15:15:11

Thx for share!! :78:

verywai 發表於 7-10-2009 15:30:19

yeah...呢張超正:71:
http://img.photobucket.com/albums/v705/Hathawaynoah/SOC/20091007010123981.jpg

F-14 發表於 7-10-2009 15:32:47

Thanks CHing for the good post! :71:
I also bought the GX-45 recently:73: .As I like the proportion of GX-1, I take quite long time to accept GX-45.:(   I must confess that Bandai has made a good balance between movability and 合金% in GX-45.At least, I play it quite happily :43:without too much worries.:77:

∼楠∼ 發表於 7-10-2009 15:44:35

如果yamato的vf用上更多比例的合金

重量上升

本来已经是卡笋的塑料关节，会更加负荷不了

bandai的dx合金vf25系列，就是因为太重，人形盘骨关节一定会松

MSW55 發表於 7-10-2009 16:21:21

:58: 長盡玩後心得！:71::71::71:

netvigator 發表於 7-10-2009 16:44:42

之前對Mazinger無愛,但見到GX-49好想買隻,不過d人又話合金成份少:no:
頁: [1]
查看完整版本: 超合金魂 Mazinger Z GX-45及GX-49小評