SDF-1, The TD MACROSS Brotherhood

Monutal

anyone seen the latest Macross Animation??

"Macross Frontier"

Very nice wor!!!

VF-25 ROCK!!!

Warmblood

原帖由 Monutal 於 9-1-2008 11:50 AM 發表
anyone seen the latest Macross Animation??

"Macross Frontier"

Very nice wor!!!

VF-25 ROCK!!!

小弟都覺VF-25好型仔.....一大冀待下一集.....

OST

原帖由 Warmblood 於 9-1-2008 11:41 AM 發表


其實我想每曰一毒......不過有少少問題延誤進度.......
1/60完全變型出後.....我想會有朋友棄48取60...始終...
1) 1/48太大"盒"....(好難偷運入境)
2) 小兒麻痺手

我之前話如果新1/60都買7~8魚我都OKAY... ...

之前o個d 1/60 yamato我都差唔多有晒喇, 依家又出1/60新version, 我願意佢出d未出過o既1/48喇

題外話, 我d玩具又要遲幾個用先可以見天日喇, 新年後先做家俬, 因為人人都話新年前訂造家俬d質素會好差喎, 個個等新年, 手工會好差, 咁我個display櫃......................................, 所以都係等過埋年先喇

Warmblood

原帖由 OST 於 9-1-2008 12:00 PM 發表

之前o個d 1/60 yamato我都差唔多有晒喇, 依家又出1/60新version, 我願意佢出d未出過o既1/48喇

題外話, 我d玩具又要遲幾個用先可以見天日喇, 新年後先做家俬, 因為人人都話新年前訂造家俬d質素會好差喎, 個個等新 ...

味等下新1/60 VERSION出成點囉....
YAMATO如肯再出1/48就唔會開多絛1/60新LINE.......

OST

原帖由 bad-aries 於 9-1-2008 12:58 PM 發表


七魚就七魚, 不過小弟沈日出去旺角睇左兩間, 都無.  同埋而家D DVD鋪, 好似執左好多間咁.

冇辦法啦, 依家係資訊發達o既年代, 上網無論game, 動畫or電視都大把有得download, DVD舗根本上好難撈, 老翻舗都少左好多啦

Warmblood

原帖由 bad-aries 於 9-1-2008 12:58 PM 發表


七魚就七魚, 不過小弟沈日出去旺角睇左兩間, 都無.  同埋而家D DVD鋪, 好似執左好多間咁.

新船仔下面間碟舖見過。

Warmblood

原帖由 bad-aries 於 11-1-2008 09:05 AM 發表


新船仔既意思, 係笑慢對面果間?

Yes + Good luck.....

roundbun

Hi guys I'm a newcomer in the macross field.. I loved watching the cartoons 20+ years back then, and am interested in getting the Yamato 1/60 transofrmable complete models.

i) has yamato stopped developing 1/72 ?  Cuz I saw some old YF-11, YF-19 & YF-21 in 1/72 scale back then, but haven't seen any recently.
ii) Is yamato concentrating on making 1/60 now?  Does that mean I better NOT to buy 1/48 toys?  Cuz I want all my macross toys to be in the same scale.
iii) Anyone has played the 1/60 Yamato YF-19 ?  Is the new black one (25th anniversary) using the same body of the white one (the cartoon version)?
thanks.

Warmblood

:65:
小弟英文奇差.....試下....有錯請大大們幫手。

) has yamato stopped developing 1/72 ?  Cuz I saw some old YF-11, YF-19 & YF-21 in 1/72 scale back then, but haven't seen any recently.
**應己停產，另記得有大大提過Yamato好成功地將舊YF-21變型糸统完完全全地......"做錯晒".......****
ii) Is yamato concentrating on making 1/60 now?  Does that mean I better NOT to buy 1/48 toys?  Cuz I want all my macross toys to be in the same scale.
**係暫時真係唔識答...
自己仲意1/48因為
1)全變型,不用換件
2) 夠大夠Detail.....
所以新1/60出得好....我亦會再痴過......但"成品"未有.......

iii) Anyone has played the 1/60 Yamato YF-19 ?  Is the new black one (25th anniversary) using the same body of the white one (the cartoon version)?
**一樣...只係轉色....参考下...
http://www.toysdaily.com/discuz/thread-48508-1-1.html
thanks.

roundbun

Warmblood, thank you so much for the prompt info!!

I just noted from Pg.2 of this thread, that there're photos of a YF-21, do you think it is the 1/72 scale model from 2003?  Cuz I know that there'll be a new 1/60 YF-21 coming soon (probably in March or April) from Yamato!

Besides, all existing 1st generation macross robots from yamato are of 1/48 scale, but also heard that the original VF-1X (focker's plane) will have a 1/60 available later in 2008, is that true?  Between, I was told that the new 1/60's hands will not be as fragile as the 1/48 VF series!

As for 1/60 YF-19... do you know what price is considered reasonable??  I saw the black version last week & the price is a little bit more than 10 fish!  Personally, would you go for the white version or the special black version?

One more question, does anyone know if Yamato is going to make the 1/60 YF-11 too?

roundbun

On Sept 17 (pg.24), a guy posted the following comments:

Seriously you guys still haven't open your Yamato's Macross toy should seriously think about it now!
Yamato has long deep poor QC problems... I think all Yamato's Macross toy should open and play with it on the first day you brought it. At least try out all 3 forms and check all location with stretch mark.
For all VF-1 check the joint between leg and hip... a lot of damage reported and it's important to check and see if there is any stretch mark around that area as well... If you found any stretch, prepare for it to break when you display in in robot form for too long...

they sure are the most beautiful toy ever made for Macross, but they are again poor with QC...

Warmblood

I just noted from Pg.2 of this thread, that there're photos of a YF-21, do you think it is the 1/72 scale model from 2003?  Cuz I know that there'll be a new 1/60 YF-21 coming soon (probably in March or April) from Yamato!
**係舊板....但小弟無玩過.....所以唔知是否1/72...Sorry...****

Besides, all existing 1st generation macross robots from yamato are of 1/48 scale, but also heard that the original VF-1X (focker's plane) will have a 1/60 available later in 2008, is that true?  Between, I was told that the new 1/60's hands will not be as fragile as the 1/48 VF series!
***1/60 VF-1糸是Yamato的改良版....以前的1/60 VF-1糸不是完全變型的.....官方已確定新1/60.....但自己所得資料有限....只知佢話"完全變型"...仲有隻手掌好似大DD......*****


As for 1/60 YF-19... do you know what price is considered reasonable??  I saw the black version last week & the price is a little bit more than 10 fish!  Personally, would you go for the white version or the special black version?
****10 fish可接受
(其實你係5係問原色定黑色 1/60 YF-19好......我真實英文好差...)
如不是Yamato死仕....我仲意YF-19原色+booster版...個booster有燈著...仲會轉色...約12fish...




One more question, does anyone know if Yamato is going to make the 1/60 YF-11 too?
***我諗要去macrossworld.com問問好D.....*****