Ar.... Just recall that I had seen one god gravion and one god sigma gravion (brand new, normal version) in Akiba in August.
kampferms18 , you finally opened up your god gravion for photo taking.:43:
This's my gravion.
No mold defect can be found, so there is no need for reconstruction.
But the weight of the upper part is really great, so I need to readjust the screws intermittently in order to keep it straight. Recently, I also added a support to the buttock to reduce the stress on the hips too.
My ways of dealing SHE loosened joint are: re screwing + detachment + thickening + roughening
1.Tightly re screwing of buttock cover if any
2.Detach the whole joint by unscrewing off the buttock cover. Then the hips should be exposed.
3. Application of small drop of AA to the surface in order to thicken and roughen the surface of the ball joint.
or
Use a knife to make small cuts on the surface in order to increase the friction between the ball and socket.
UKU is a good choice but the drop would be too large for small joint. Besides it will dissolve the resin and you will not be able to rescue it if any problem arises. Furthermore, excessive AA can be scratched off easier than UHU without any risk of dissolving the joint and it dries up quicker, so it is the best choice.
P.S. MAX also recommended usage of AA glue for loosened joints in MAX factory toys.
樓主: genesicgaogaiga
樓主
發表於 15-9-2008 18:01:00
