[問]halfeye最小變形

紫月葵

玩過隻完全變形三一，係就係幾過癮，但絕對唔come玩，而且複雜得濟，要扭既野太多，好易傷到d螺絲同膠件
反而想問下最小變形會唔會好d？

另外，有同志可以分享一下halfeye既超能加爾及凱撒大帝既圖嘛？
一直都只係搵到d完成圖，想睇下佢地既"內構圖"，先再諗下值唔值得入手，thx

[ 本帖最後由 紫月葵 於 2-11-2009 08:14 PM 編輯 ]

KK

你可以參考之前個Post！:shy:

http://www.toysdaily.com/discuz/viewthread.php?tid=97771&highlight=



[ 本帖最後由 KK 於 31-10-2009 11:03 PM 編輯 ]

紫月葵

原帖由 KK 於 31-10-2009 10:58 PM 發表
你可以參考之前個Post！:shy:

http://www.toysdaily.com/discuz/viewthread.php?tid=97771&highlight=

呢個睇過，之前都搵左好多hk、tw、jp網站既相，可惜始終內構圖都係比較少:79:

mkyfk

there is not big different between halfeye and 合金, just the scale of halfeye is better than 合金.

紫月葵

原帖由 mkyfk 於 1-11-2009 08:39 AM 發表
there is not big different between halfeye and 合金, just the scale of halfeye is better than 合金.

有出過合金版本？
其實我想睇下佢既"最小變形"既"最小"都可以仲變得到到咩程度

紫月葵

push

紫月葵

push

紫月葵

push

mkyfk

just need to add the hand after transfer to robot.

紫月葵

原帖由 mkyfk 於 3-11-2009 10:16 AM 發表
just need to add the hand after transfer to robot.

駛唔駛話好似完全變形咁要經常及多次上緊螺絲？

mkyfk

same as 完全變形, but I also not recommend you to adjust the tight of screw many times, the thread of resin part would easy to damage.

紫月葵

原帖由 mkyfk 於 3-11-2009 01:19 PM 發表
same as 完全變形, but I also not recommend you to adjust the tight of screw many times, the thread of resin part would easy to damage.

冇完全變形咁複雜應該就唔駛話經常上緊既…我諗

mkyfk

umm............same problem......this is the weakness of halfeye's product

genesicgaogaiga

For SHE toy, loosening of joint mainly depends on the weight being supported by the joint.
Since the parts of simple change series are usually lower, so they should be better.

But for complex combination like Great Mighgaine and Ultimate Gravion, certain joints would bear heavy weight, so there joints may get loosen after time.

genesicgaogaiga

原帖由 紫月葵 於 1-11-2009 00:20 發表
呢個睇過，之前都搵左好多hk、tw、jp網站既相，可惜始終內構圖都係比較少:79: