玩開halfeye既大大請進

紫月葵

有玩開既都知佢用"螺絲"既設計其實都有d問題存在，最明顯就係關節郁得多時螺絲位就會變鬆，需要扭番緊，但扭得多又會勞損，甚至入錯力搞到滑牙…
其實有冇d治本既方法，可以好似細個玩開果d takara或其他廠既出品咁用鐵支之類既去代替etc. ？

genesicgaogaiga

原帖由 紫月葵 於 6-10-2009 15:09 發表
有玩開既都知佢用"螺絲"既設計其實都有d問題存在，最明顯就係關節郁得多時螺絲位就會變鬆，需要扭番緊，但扭得多又會勞損，甚至入錯力搞到滑牙…
其實有冇d治本既方法，可以好似細個玩開果d takara或其他廠既出品咁 ...

That's the problem of screws on toy.

變鬆 and 滑牙 after repeated re screwing may occur.
That's why I bought multiple bags of screws from Tokyo Hands.
I have got different dimensions, screw thickness and length. In case of 滑牙, I can use  new screws for replacement.
In case of deformed resin, I can use longer screws for re screwing.

Metallic rod would be too smooth, it may allow the joint to move smoothly but may not be able to allow the toy to stand by itself.

Besides, there are too many screws in SHE toy, 100% replacement is problematic.
Furthermore, some sites may be difficult in finding replacement.

I have searched SHE screws for years and finally found them in Tokyo Hands last year.:73:

AmuroNu

通常我第1次玩時,因為關節都會比較fit,所以螺絲不上太緊....
長此玩落去都不太傷''身''!

紫月葵

原帖由 genesicgaogaiga 於 6-10-2009 03:52 PM 發表


That's the problem of screws on toy.

變鬆 and 滑牙 after repeated re screwing may occur.
That's why I bought multiple bags of screws from Tokyo Hands.
I have got different dimensions, screw t ...

但我有一個疑問，就係好似cms或takara etc.，有時都係用螺絲做關節位，但都實嫁喎…其實係咪因為用既膠唔同所以會有呢個分別？

genesicgaogaiga

原帖由 紫月葵 於 6-10-2009 21:27 發表
但我有一個疑問，就係好似cms或takara etc.，有時都係用螺絲做關節位，但都實嫁喎…其實係咪因為用既膠唔同所以會有呢個分別？

could be a possible reason.

But cms & takara are not solely using screw as interconnecting material. Part of plastic is molded into interconnecting part too.

紫月葵

原帖由 genesicgaogaiga 於 6-10-2009 09:34 PM 發表



could be a possible reason.

But cms & takara are not solely using screw as interconnecting material. Part of plastic is molded into interconnecting part too.

好想諗d方法搞好呢個問題，令玩果時可以放心少少:79: