[求救] SIC 放太耐 熔膠問題
我想相大部份都可能遇到同樣問題D SIC OR 扭蛋公仔放太耐
D膠會痴立立咁,用水洗左都係一樣
有冇C HING有解決方法?
THANKS 放入雪櫃一日:36: 用普通藥房買的 "消毒火酒"
就可以未走痴立立的了,
不要用其他溶劑如"白電油","天拿水"
因為會溶色的. 長遠無解決辦法, BANDAI用D料真係唔得 放入雪櫃一日
冬暖夏涼小恐龍 發表於 1-8-2013 01:47 AM http://www.toysdaily.com/discuz/images/common/back.gif
認真?{:1_200:} 本帖最後由 老文 於 1-8-2013 03:03 PM 編輯
1:1..舊牙刷加綠色萬潔靈清洗沖水待乾即可...不過過一段時又會出番油{:1_228:}
http://www.toysdaily.com/discuz/viewthread.php?tid=182616&highlight=
有空可看看我"舊屎"...(舊時出的POST) 平時室溫太高~ 開冷氣啦~
:62: 我睇到標題都係想答放入雪櫃，點知比人答先:p 長遠無解決辦法, BANDAI用D料真係唔得
luciferdark 發表於 1-8-2013 01:51 PM http://www.toysdaily.com/discuz/images/common/back.gif
係前期D SIC係咁
VOL.三十幾打打後個D冇咁嚴重OR冇乜事 係前期D SIC係咁
VOL.三十幾打打後個D冇咁嚴重OR冇乜事
ANDY24138 發表於 1-8-2013 02:51 PM http://www.toysdaily.com/discuz/images/common/back.gif
新個D未有事係因為時間未到
香港天氣, 避無可避
就算洗完噴光油, 一段時間都係出油
我已經絕望了 回復 1# ANDY24138
兄要定期通啊 因為環保問題，所以採用了較容易分解的原料生產 用普通藥房買的 "消毒火酒"
就可以未走痴立立的了,
不要用其他溶劑如"白電油","天拿水"
因為會溶色的.
唔嚴重先得,太嚴重都唔掂,我試過
有人話雙氧水浸,但我未試過 痴立立事小, 斷肢仲大件事{:1_200:}
RE: [求救] SIC 放太耐 熔膠問題
To All Gentlemen & Comerades,In brief., NOTE these are " PHTHALATE " only came out from P.V.C. material, after years of expose & displaying., This is chemical " Softener or Plasticizer " added with P.V.C., during production, so as to make & achieve P.V.C. flexible.
You will never find " Oily " leaks from either rigid plastic, (GP/PS- General Purpose Polystyrene) or ABS, plastic resins.
However, always be careful with these oily substances, when long time exposure with " Phthalate " - as captioned above - case " Canser "
頁:
[1]
2